Overspray commonly occurs when an affected area of the car is being repainted and the rest of the areas aren’t properly covered. This human error can lead to various disadvantages as paint overspray is a common contaminant that will eventually dry and will bond with the surface of your car. Fortunately, there are several cost-effective tactics that you can use to remove overspray from car. However, if you are worried that the original paintwork and the surface of your car will get damaged when you remove the overspray yourself, you can hire an expert for this. Some easy and effective methods for the removal of overspray are.
1. Use of a Clay Bar
Surface contaminants
are very harmful to your car. Many companies that offer car decontamination service make the use of clay bars and it has
been highly effective. The main purpose of a clay bar is to remove all the
bonded contaminants from the surface of your car. Here is how a clay bar can be
used to remove overspray particles.
Method
● First of all, a
top-rated clay bar must be bought from a store. Clay bars are commonly
available in big stores and can be purchased online as well. A paint removing
lubricant has to be bought along with a clay bar and if not available, warm
water and soap can also be used.
● A clay bar exposed to
dirt can absorb it and later on will cause scratches on the surface of your
car. If the clay bar is new then you can use it immediately, however, an old
bar must be twisted by the hands properly until its surface gets cleaned.
● The next step is the
lubrication of the surface that contains the paint overspray. Different
lubricants are acquired for different services and if not available, a mixture
of warm water and soap will help. The affected surface should be completely wet
before the use of the clay bar to remove
overspray from car.
● Once you start rubbing
the clay bar over the sprayed surface, you will automatically feel friction.
Once the surface gets smooth, you won’t feel the friction anymore and you will
see that the overspray has been removed.
2. Use of Razor Blade
Different top-rated
companies that offer graffiti removal
services for cars make use of clay bars for overspray removal from glass
windows. There are many other methods as well and one of them is the use of a
razor blade. Here is how a razor blade is effective on glass surfaces.
Method
● Firstly the
over-sprayed glass surface should be lubricated. Vinegar can be used and can be
applied with the help of a clean rag. As a precautionary measure, experts wear
gloves while doing this and ensure that the surface is completely wet.
● Experts advise you not
to saturate the overspray surface with vinegar, however, you should saturate it
with a solution of soap and warm water. This is very helpful as it prevents the
blade from causing scratches on the glass surface.
● At last, the use of a
razor blade should be done with extra care. Skilled technicians advise using a
blade with a 45-degree angle while removing the overspray from the glass
surface in a carefully slow motion.
Posted by Et handyman service
Comments